Jump Leads

AKA: Jumper Cables, Starter Cables

Back To Tool List
WARNING:

Always connect jump leads in the following order: Positive (RED) to battery + on both vehicles; Negative (black) to - on both vehicles. Remove cables in the opposite order. Never allow jump leads to come into contact with water or metal when connected to batteries, especially when the vehicle is running. This would pose a deadly electrocution risk.

Information A set of thick cables for transferring power from one vehicle (donor) to another (patient). Jump leads (red = positive, black = negative) To use, see Jump Starting A Car.
See It In Action
Permanent link to this tool profile: https://www.burtman.net/tools/?ident=jump_leads
Back To The Top