Inline Fuse Holder
AKA: Single Fuse Holder
Back To Tool List
WARNING:
Make sure the cable you are attaching this device to is capable of carrying a current higher than that of the rated fuse, otherwise excessive current may cause the cable to melt instead of the fuse, potentially resulting in fire.
A new fuse holder usually has a loop of cable attached.
Cut the cable loop and solder each end securely into the wiring you want to protect. Use a correctly-rated fuse and your circuit will be protected from excessive current and the fire risk it carries.
Permanent link to this tool profile: https://www.burtman.net/tools/?ident=inline_fuse_holder